Understanding your Ring Video Doorbell Pro light patterns

Find out which Video Doorbell model you have.

The LED light on the front of your Ring Video Doorbell Pro or Ring Video Doorbell Pro 2 indicates the status of your doorbell. A solid white light means it's either in idle mode or recording.

Example Flashing Light Pattern Activity
pressed.gif LEDs around the button spin blue Ordinary button press
setup_doorbell_pro_ap.gif LEDs around the button spin white Attempting to set up wifi when the device doesn't have any saved wifi credentials. Times out after 10 minutes.
setup_doorbell_pro_connecting.gif Blue light moving upwards In the process of connecting to network during setup
setup_doorbell_pro_ota.gif White light flashing on and off Firmware update in progress
boot.gif       Blue circle is flashing, one second on, one second off Device is booting up
setup_doorbell_pro_engaged.png Solid blue light The speaker has been enabled
doorbell_pro_successful_setup.gif LEDs flash four times

Successful set up.

Note: It can take up to an hour for Ring Video Doorbell Pro to fully power on upon first installation.

setup_doorbell_pro_fail_top.gif Flashing white light at the top of the circle Setup failed - password error
setup_doorbell_pro_fail_right.gif Flashing white light at the right of the circle Setup failed - couldn't connect to Ring network
setup_doorbell_pro_fail_left.gif Flashing white light at the left of the circle Setup failed - another reason
ezgif-4-02017b2be346.gif Short rapid flashing burst of blue light, followed by a spinning white circle Factory restore
Doorbell-Pro-tophalf_blue_blink__1_.gif Top half blue flashing During setup - incorrect password / after connection to power - device is charging
RVPro2Light.gif Bottom half red flashing Device is not receiving enough power

Join Our Community

Share feature requests, get help, and discuss the latest in security with your fellow users on Ring's first community forum.