Setting up your Ring Chime Pro in the Ring app

Setting up your Ring Chime Pro in the Ring app is simple. Simply scroll down for a step-by-step guide.

1. Download the Ring app

To download the Ring app:

  • On your mobile device, go to the App Store (for iOS devices) or the Play Store (for Android devices).
  • Search for “Ring.”
  • Download and install the Ring app on your mobile device

Or visit on your mobile device.

2. Create or log in to your account

If this is your first Ring product, you will be asked to set up an account.

To set up an account:

  • Open the Ring app.
  • Select “Create Account.”
  • Follow the in-app instructions to create a new account.

If you already have another Ring device installed, simply open the Ring app.

3. Tap “Set Up a Device”

Tap “Set Up a Device” then select “Chimes”

4. Scan the QR code or MAC ID barcode on your Ring device

You can scan the QR code on your Ring device or the product packaging via the Ring app.

  1. Tap I’m Ready to Scan
  2. Point your smartphone camera at the QR code on your Ring device or product packaging
  3. Centre the code in the camera's view in the bottom half of the screen
  4. When the code is recognised, you will see a green square and a pop-up with your device image

If you experience issues when scanning the QR code:

  • Move your camera closer or further from the QR code to help it focus
  • Once your camera finds focus, hold it steady for a few seconds
  • If your camera won’t focus, clean your camera lens, move to a well-lit area, and try again

If you continue to experience issues:

  1. Tap Other Options below the scanner
  2. Tap Can’t Scan the QR code
  3. Tap Enter code manually (this corresponds to PIN code digits underneath the QR code)
  4. Find your device in the list
  5. Enter your five digit PIN which can be found below the QR code

5. Specify your location

If this is your first time setting up a Ring device, you will receive a request from your phone informing you that the Ring app wishes to use your phone’s location services to pinpoint your location. Allowing the app to do so will assist with inputting your address.

Enter your address information into the app, then confirm it.

If you have established a location previously, you can select it from the list of your locations.

Note: Without a specific location, certain features of your Chime Pro will not work properly.

Click here to learn more about Ring devices and your address.

6. Plug in your Ring Chime Pro

Plug your Chime Pro into a standard wall outlet somewhere between your Wi-Fi router and any of your Ring devices that you plan to connect to your Chime Pro. Once it is plugged in, the Ring logo on the front of your Chime Pro will begin pulsing blue.

7. Name your device

Select a specific name for your Chime Pro to distinguish it from other Ring devices on your account. You can choose one of the default names that are suggested, or you can enter your own by selecting “Custom…” at the bottom of the list.

8. Put your Chime Pro into setup mode

If you have never set up your Chime Pro before, it will automatically enter setup mode. Simply wait for the Ring logo on the front of your Chime Pro to begin to pulse slowly, then press the “Continue” button in the Ring app.

If the Ring logo does not begin to pulse slowly, or if this Chime Pro has been set up previously, press and hold the small button on the side of your Chime Pro for five seconds. Make sure to keep your Chime Pro plugged in during this process.

9. Connect to your Ring device

iOS: Tap “Join” when the Ring app asks to join the Ring Wi-Fi network.

Android: Your device should automatically connect to the Ring Wi-Fi network.

If your device does not automatically connect to the Ring Wi-Fi network, or if you chose to continue without scanning in step four, please follow the steps below:

  • Press the home button on your phone to leave the Ring app.
  • Navigate to the “Settings” app, then tap “Wi-Fi.”
    • On Android, you may need to navigate to “Connection” then “Wi-Fi.”
  • Select the Ring Wi-Fi network from the list of available networks. The network will appear as “ChimePro-” followed by the last six digits of the MAC ID.
  • Once connected, close your “Settings” app and return to the Ring app

10. Connect your Ring Chime Pro to your Wi-Fi

Be sure you have your Wi-Fi password ready.

  • Select your Wi-Fi network.
    • If you have more than one Wi-Fi network, select the network closest to where you will be installing your Ring Chime Pro.
  • Enter your Wi-Fi password and press “Continue.”

Note: After connecting to your Wi-Fi network, your Ring Chime Pro may update its internal software. While performing an update, the Ring logo on the front of your device will flash blue. Once the Ring logo stops flashing and lights up solid blue, you know the update is complete and you can continue the setup.

11. Connect to your other Ring devices

Select the Ring devices and types of events you would like your Chime Pro to sound an alert for, as well as any devices you would like to connect to the Chime Pro network.

Note: You can change when your Chime Pro will alert you at any time by going to the “Linked Devices” settings for your Chime Pro inside of the Ring app.

Click here to download the instruction manual.

Join Our Community

Share feature requests, get help, and discuss the latest in security with your fellow users on Ring's first community forum.