Setting up your Ring Video Doorbell (2nd Generation) in the Ring app

Learn how set up your Ring Video Doorbell (2nd Generation) from the Ring app.

Note: For Ring Video Doorbell (2nd Generation), you will need to remove the mounting bracket to see the set up button. To get the mount off the back of the Ring Video Doorbell (2nd Generation), put two fingers on the mount and then with the other hand, pull the doorbell straight back to release the magnet that's holding them together. 

Download the Ring app by searching “Ring” in the App Store (for iOS devices), the Play Store (for Android devices) or by visiting ring.com/app on your mobile device. If this is your first Ring product, you will be asked to set up an account.

Find out whether you have the Ring Video Doorbell (1st Generation) or Ring Video Doorbell (2nd Generation).

Learn how to connect your doorbell to your in home chime.

Set up your Ring Video Doorbell (2nd Generation)

To set up your Ring Video Doorbell (2nd Generation:

  1. Open the Ring app.
  2. Tap the menu (☰).
  3. Tap Set Up a Device.
  4. Tap Video Doorbells.
  5. Tap the blue I’m Ready to Scan button.
    • Use your mobile device’s camera to scan the QR code on the device’s packaging.
    • When a green square and pop-up with your device image appear, the code has been recognised.
  6. Enter the Location where your Ring Video Doorbell (2nd Generation) is being set up.
  7. Give your doorbell a Device Name.
    • You can proceed with the device’s default name or give it a custom name.
  8. Connect your doorbell to Ring
    • iOS: Tap Join when the Ring app asks to join the Ring wifi network.
    • Android: If your device does not automatically connect to the Ring wifi network:
      • Exit the Ring app
      • Go to your mobile device’s Settings.
      • Tap wifi.
      • Select either Ring- or Ring Setup.
      • Once connected, close your Settings app and return to the Ring app
  9. Tap Continue in the app when the blue light stops flashing.
  10. Connect to your preferred wifi network.

Once your device automatically finalises the setup process, it will be ready to use.

*Giving the Ring app access to your location services will help you with inputting your address. Certain features of the device will not work properly without location access.

Troubleshoot QR code scanning issues

If you are experiencing issues scanning the QR code:

  • Ensure you are in a well lit area.
  • Move your camera closer or further from the QR code to help it focus.
  • Once your camera finds focus, hold it steady for a few seconds.
  • If your camera won’t focus, clean your camera lens, move to a well-lit area, and try again.

If you continue to experience issues, please follow these additional steps:

  1. Tap Other Options below the scanner.
  2. Select Can’t Scan the QR code.
  3. Select Enter Code Manually (this corresponds to PIN code digits underneath the QR code).
  4. Find your device in the list.
  5. Enter your five digit PIN located below the QR code.

Test your device

Once your doorbell has completed its update and setup, push the front button to complete a test call. This will initiate your software and ensure your doorbell is ready to function.

How to install your Ring Video Doorbell (2nd Generation) with an existing doorbell.

How to install your Ring Video Doorbell (2nd Generation) without an existing doorbell.

Join Our Community

Share feature requests, get help, and discuss the latest in security with your fellow users on Ring's first community forum.