Installing the Solar Charger for Ring Video Doorbell (2nd Generation)

Installing your Solar Charger with your Ring Video Doorbell (2nd Generation) is a very a simple process. Scroll down for a step-by-step guide.

Note: Wall anchors are optional and are only needed when mounting to a hard surface, such as brick or stucco.

1. (Optional) Uninstall your Ring Video Doorbell (2nd Generation)

If your Ring Video Doorbell was already mounted on your home, go ahead and remove the mounting bracket. To uninstall the Ring Video Doorbell.

  • Remove the security screw.
  • Pop off the faceplate.
  • Remove the mounting screws.

Image-02_preview.jpeg

2. Mount the Solar Charger

Using the provided screws mount your new Solar Charger to the wall.

Note: If you are mounting the Solar Charger to a brick or stucco wall, you will need to use the provided wall anchors.

step2_3x-80.jpg

3. Attach your Ring Video Doorbell 

Attach your Ring Video Doorbell mounting bracket to your solar charger.

step3_3x-80.jpg

4. Connect the Micro USB cable

Connect the Micro USB cable to the charging port located on the back of your Ring Video Doorbell.

Image-05_preview.jpeg

5. Mount your doorbell

Fit your Video Doorbell onto the mounting bracket, taking care to feed the retractable wire back into the solar charger.

step5_3x-80.jpg

6. Finish your installation

Finish your installation by securing your Video Doorbell to the mounting bracket with the security screw.

step6_3x-80.jpg


Click here for more information on the Solar Charger for Ring Video Doorbell (2nd Generation).

Join Our Community

Share feature requests, get help, and discuss the latest in security with your fellow users on Ring's first community forum.