Learn how to replace the faceplate for Battery Doorbell Plus and Video Doorbell 2, 3, 3 Plus, and Video Doorbell 4.
Changing or replacing the faceplate for Battery Doorbell Plus
-
-
Remove the security screw(s).
Use the star-shaped bit (T15 Torx) screwdriver that came with your device.
-
Remove the faceplate.
Pull the bottom edge of the faceplate toward you to remove.
-
Place the new faceplate.
Slide the faceplate into the slot under the camera. Then swing down the bottom of the faceplate until it clicks into place.
-
Reinsert the security screw(s).
Use the star-shaped bit (T15 Torx) screwdriver that came with your device to reinsert and tighten the security screw(s).
-
Remove the security screw(s).
Warning
Do NOT use any other screws. Only use the small security screw(s) that came with your Ring device.
Instructions also valid for the following Doorbells:
- Battery Doorbell Plus
- Video Doorbell 4
- Video Doorbell 3 Plus
- Video Doorbell 3
- Video Doorbell 2
